GRASS VALLEY OCP 400 - Page 37

OCP 400 Operational Control Panel User’s Guide (v12.0) 37
Chapter 4 - Operation
The last item in the scene file list is <New File>. Select this item to create a new file on your
card and store the current camera settings to the new file.
The default name appears for your new file. You can change it by using the Rotary Control to
select a character and the PREV and NEXT buttons to move the cursor back and forward.
• Use the TOGGLE button to select a different character set (abc - 123 - #!@ - ABC).
• Select CLEAR to clear the file name.
• Select OK to use the new filename. The file will be added to the card and the current
settings are stored in this file.
• Select CANCEL to cancel the operation and return to the Recall/Store menu.
☞
Note
☞
Note
File names can have up to ten characters.
TOGGLE
PREV NEXT
EXIT
CLEAR
[OCPfile_ ]
Filename: OCPFile01
OK Cancel =><=
abc
Clear
file
name
Move
cursor
forward
New
file name
Cancel
file
name
Confirm
file
name
Move
cursor
back
Select
character
set