GRASS VALLEY XCU UXF Fiber Series - Accessing the XCU Menu; Using the Front Panel and Display; Using the Front Panel and the Monitoring Output

XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3) 27
Chapter 3 - Configuration
3.3 Accessing the XCU menu
3.3.1 Using the front panel and display
The easiest way to operate the XCU menu is by using the front panel and display.
• Push and hold the Forward button [5] for two seconds until the following selection menu
appears:
• Select the Menu (XCU Display) option and push the Forward button to select. Or push
the Back button to return to the main display status.
• The XCU Menu appears. Use the Up, Down buttons to scroll through the menu items,
Back to go one level up and Forward to open a submenu or to enter a value when a
function is selected. The function value is shown in the bottom right of the display.
3.3.2 Using the front panel and the Monitoring output
• Connect a viewing monitor to the Monitoring output of the XCU.
• Push and hold the Forward button [5] for two seconds until the following selection menu
appears:
• Select the Menu (Monitoring) option and push the Forward button to select. Or push the
Back button to return to the main display status.
SelectBack
Make selection:
Change camera number
Menu (Monitoring)
Menu (XCU display)
976
Timing
H Phase
IP Video Out
TICO Out
UHD Out
SelectBack
Make selection:
Change camera number
Menu (Monitoring)
Menu (XCU display)