XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3) 33
Chapter 3 - Configuration
3.7 Color bars
For setup and test purposes, the XCU can generate a color bar signal at the main video outputs
(baseband connectors and Media Network simultaneously).
The color bar also appears when no camera is connected and no valid video signal is received
(unless the the INSTALL > NO SIGNAL item is set to Black).
• To turn on the XCU color bar, go to the VIDEO > COLOR BAR > COLOR BAR item and select
On.
• The color bar type can be selected with the VIDEO > COLOR BAR > COLOR BAR TYPE
item. Two HD color bar types are available: Split (default) and Full.
Split bar (according to
SMPTE RP215)
Full bar (with grey bars
at the sides)
To Next Page
Loading...