XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3) 49
Chapter 4 - Media Network configuration
4.3.7 IP Intercom tab
The list of camera systems is shown, sorted by camera number. In this tab the incoming and
outgoing IP Intercom streams can be set up.
Click the camera system you want to set up. The edit popup window appears in which you can
edit the following parameters:
Source — Selects input source for intercom Eng and Prod channels. Analog = from intercom
subD-connector at backpanel of XCU (Cradle); Ext1 = from embedded SDI audio of external
video input 1 (EXT1). AES67 = from AES67 Intercom stream on the Media Network.
Program source— Intercom or Audio.
To Next Page
Loading...