XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3) 51
Chapter 4 - Media Network configuration
Channel mapping for audio and intercom
For the audio and intercom audio channel mapping on the Media Network, refer to the table
below:
4.3.8 PTP tab
The XCU can be synchronized over the Media Network to a PTP grandmaster clock using the
Precision Time Protocol (PTP).
The PTP subtab can be found by clicking the double arrow (<<) at the left. The sub tab is
located in the first group of sub tabs.
The list of camera systems is shown, sorted by camera number. In this tab you can set up
synchronization to a PTP grandmaster.
Ch 1 Ch 2 Ch 3 Ch 4 Ch 5 to 8/16
Output stream
Audio A1 Camera
Audio 1
Camera
Audio 2
Camera
AES1
Camera
AES2
<mute>
Intercom A1 Prog (Program)
intercom
(Program
spare)
<mute> <mute> <mute>
Input stream
Audio A1 Eng intercom Prod intercom Prog (Program)
intercom
(Program
spare)
<mute>
Intercom A1 Eng
intercom
Prod
intercom
<mute> <mute> <mute>
To Next Page
Loading...