GRASS VALLEY XCU UXF Fiber Series - Install Menu Options

66 XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
Chapter 6 - XCU menu reference
6.4 Install menu
Menu item Settings Default Level Description
Cam Conn
ConnectType Cable, Network Cable User 2 Selects the connection type between camera
and XCU:
Cable = camera and XCU are connected directly
by the transmission cable.
Network = camera and XCU are connected via
the Media Network
Note: only available when the “GVLC-XF-Direct-
IP” eLicense is installed.
Name <text> — User 2 Sets Network name for XCU
Note: only available when the “GVLC-XF-Direct-
IP” eLicense is installed.
Number 1..99 1 User 2 Selects logical camera number.
Streams
BackPanel ExtOut Off, On On Service Switches off External video output stream to XF-
adapter (use this setting to save bandwidth in
Direct IP mode).
Teleprompter Off, On On Service Switches off Teleprompter video output stream
to XF-adapter (use this setting to save bandwidth
in Direct IP mode).
Alias <text> — User 2 Sets Alias for the camera system.
Device ID <text> — User 2 Sets Device ID for the XCU.
Timing
H Phase 0..99 50 User 0 Sets the horizontal (H) sync phase.
IP Video Out -5000 .. 5000 0 User 0 Sets timing advance or delay for outgoing video
streams on the Media Network in μs with
respect to reference video.
UHD Out -5000 .. 5000 0 User 0 Sets timing advance or delay for outgoing UHD
video streams in μs with respect to reference
video.
HS -5000 .. 5000 0 User 0 Sets timing advance or delay for outgoing HS
video streams in μs with respect to reference
video.
TICO Out -5000 .. 5000 0 User 0 Sets timing advance or delay for outgoing TICO
video streams in μs with respect to reference
video.
Audio Delay 0..170 ms 0 ms User 0 Sets delay for outgoing audio signals (both
basebands and IP streams) with respect to
video.
Shift
Pixels 0..1920 0 Service <Advanced settings>
Lines 0..1080 0 Service <Advanced settings>
Time/Date
Time <time> — User 2 Shows current time.
Date <date> — User 2 Shows current date.
Change Time
Hours (24h) 0..23 0 User 2 Sets the value for hours.