GRASS VALLEY XCU - Main (HD Video) Output Connectors; SDI out Video Connectors

XCU eXchangeable Control Unit User’s Guide (v1.6) 51
Chapter 6 - Connectors and signals
☞
Note
☞
Note
Make sure that the applied external video inputs match the temporal frequency (50/59.94 Hz)
of the selected camera video mode and that they are synced with the camera output signal.
External video signals
The video signals applied on the external video inputs are returned to the camera. Apply the
external video signal according to the following table:
6.2.3 Main (HD Video) output connectors
6.2.4 SDI Out video connectors
Selected camera 
video mode
External video input
(Ext1, 2 or 3)
Output on the 
camera adapter
1080p50/59 576i50 or 480i59.94 1080i50/59
1080p50/59 1080i50/59
720p50/59 no signal
1080i50/59 no signal
720p50/59 576i50 or 480i59.94 1080i50/59
1080p50/59 no signal
720p50/59 720p50/59
1080i50/59 no signal
1080i50/59 576i50 or 480i59.94 1080i50/59
1080p50/59 no signal
720p50/59 no signal
1080i50/59 1080i50/59
Connector Signal or function
HD-SDI A (2x), B (2x), C (2x) 6x BNC, 0.8 Vpp, 75 , SMPTE 292M (1.5 Gbit/s) with embedded audio
In 1080p50/59.94 mode: 6x BNC, 0.8 Vpp, 75 , SMPTE 425M (Level A or B),
(3 Gbit/s) with embedded audio.
HD-SDI D / Live/Effect (2x) 2x BNC, 0.8 Vpp, 75 , SMPTE 292M (1.5 Gbit/s) with embedded audio (1080i
or 720p modes only) or SMPTE 259M (270 Mbit/s) (switchable)
Connector Signal or function
SD-SDI-1 BNC, 0.8 Vpp, 75 , SMPTE 259M (270 Mbit/s)
SD-SDI-2 BNC, 0.8 Vpp, 75 , SMPTE 259M (270 Mbit/s)