252
Program description - Telemetry
SENSOR SELECT
Selecting sensors
After selection of the desired menu line with the
selection keys of the left or right four-way button …
TELEMETRY
SETTING & DATA VIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
TEL.RCV.
RCV CH1
… and a subsequent tap on the center SET key of
the right four-way button, the selected sub-menu will
open.
SENSOR SELECT
RECEIVER
GENERAL MODULE
VARIO MODULE
ELECTRIC AIR.MOD
GPS
This menu option can be used to determine which of
the graphic displays described on page 38, as well
as those described previously for sub-menu »SET-
TING & DATAVIEW«, can be selected and which
remain hidden.
Activate (
) or deactivate ( ) the display of respec-
tive sensors by selecting the desired lines with the
selection keys of the left or right four-way button
then tapping on the center SET key of the right four-
way button, e. g.:
SENSOR SELECT
RECEIVER
GENERAL MODULE
VARIO MODULE
ELECTRIC AIR.MOD
GPS
You must make this selection in order to include the
corresponding sensor in the “SELECT VOICE MES-
SAGE” sub-menu, see page 254, and to display
telemetry data in the respective data displays, start-
ing on page 38.
To Next Page
Loading...
