GRAUPNER HoTT MC-16 Series - Page 255

255Program description - Telemetry
four-way button, the selected voice message can be
activated ( ) or deactivated ( ).
TX VOLT:
MODELTIME:
BATTERYTIME:
TIMER(GE.)CENTER:
TIMER(GE.)TOP:
PHASE TIMER:
TIME:
RECEIVER
After selection of the desired menu line with the 
selection keys of the left or right four-way button …
8
7
15
VOICE TRIGGER
REPEAT 10SEC
TRIG
TRANSMITTER
RECEIVER
VARIO
… and a subsequent tap on the center SET key of the
right four-way button will open the selected sub-menu:
TEMP:
STRENGTH:
RX VOLT:
LOWVOLT:
Here, after selection of the desired line with the 
selection keys of the left or right four-way button and
a subsequent tap on the center SET key of the right
four-way button, the selected voice message can be
activated ( ) or deactivated ( ).
“Sensors”
These lines only appear if you have already activated
at least one sensor in the “SELECT SENSOR” sub-
menu of the »Telemetry« menu; see page 252. The
method of selecting corresponding voice messages is
as described in the previous sections.
Note:
The points you select here are entirely independent
of the “VARIO” messages.