GRAUPNER mz-24 PRO - Page 36

S (SYSTEM Menu)
Press the SYSTEM menu gear icon (purple “S”) to
bring up the SYSTEM submenu screen:
BACK
SYSTEM
BASE
FUNCTION
ST mode
Etc. Set
Warning
Display
MP3
Stick Cali
This menu is transmitter-specific and the submenus
are applicable to all models. However, the Warning
menu options will vary slightly according to certain
model settings:
Name Menu Page
ST mode Stick mode 208
Warning Warning instructions 210
Etc. Set Various settings 212
Display Display settings 216
Stick Cali Stick calibration 220
MP3 MP3 Player 222
T (Telemetry Display)
Press the TELEMETRY icon (blue “T”) to bring up the
TELEMETRY display. The Telemetry display has no
submenu icons but has differing screens depending
on system settings. By default, the receiver display
appears:
RX
-41dB
Receiver
BACK
NEXT
TX
-62dB
VOLT
04.1V
Min V
04.1V
TEMP
+032°C
QUA
100%
STR
100%
L-PACK
2000ms
Note this display will only appear if the Outdoor disp
function of the SYSTEM submenu Display is turned
ON .
If no sensors are connected to the receiver and the
Outdoor disp option is OFF (as shown below):
Display
BACK
Backlight o
Touch sense
Logo color
Outdoor disp
RFID
OFF
1
DEFAULT
OFF
Brightness
15
AAAAA876
INC
RES
DEC
Then the display will appear as follows:
BACK
5.2V
VOLT
5.0V
L-VOLT
3.0 3.0
R
25
6.0 6.0
0 0
70
-20
+26°C
TEMP
- 58dB
- 52dB
T
0020ms
L
075%
S
100%
Q
Refer to the Telemetry section of this manual (page
225) for additional information on the display screens.
36 Program description