“DATA VIEW” of the “EXT MODULE “ appears on the display of the Graupner polaron EX-1400:
Control Function
Up Moves the cursor “>“ at the beginning of a line of data pages
step upward or increase a value in an active value eld
Down Moves the cursor “>” at the beginning of a line of data pages
step back or a reduced value in an active value eld
SET Activates and deactivates value elds
DEC Scrolls one page back
INC Scrolls one page forward
• The data shown in the display depend on the connected device. Consult the instruction
manual supplied with your esc for more informations.
• For technical reasons, the transmission of telemetry data occurs only at certain time intervals.
For these reasons there may be a delayed reaction between buttons input and setting changes.
This is therefore not due to an error.
PM 04:41:14
E.S.C.
CH1 CH2
[ESC] DATA VIEW <>
DEC
DW
UP
SET
INC
Curr: 0.0Max 0.0A
Volt: 11.9Min 11.9V
ESC : 24°Max 23°C
BEC : 5.5Min 5.5V
RPM : 09876Max 09123
Capacity: 0 mAH
ERROR:
To Next Page
Loading...
