GRAUPNER POLARON EX-1400 - Page 50

English
50
51
Battery temp is too high
to be operated!
Bat. Temp Too High
◄ The battery temperature is higher than the set maximum tem-
perature.
Internal temp is too high!
Contact Service
if this message
appears often.
Internal Temp.
◄ The charger is overheated! Wait until it cools again! If the
error message is displayed permanently, please contact the
service.
BLC Port is opened!
Pls check the BLC port.
Balancer Port
◄ No balancer connected.
BLC Volt High
Balancer cell voltage is
too high!
Over cell is [0]
◄ The balancer has stated (cell number in parentheses) too high
cell voltage.
Balancer cell voltage is
too low !
Low cell is [0]
BLC Volt too low
◄ The balancer has stated (cell number in parentheses) too low
cell voltage.
Pls reconnect the motor
and restart!
Motor Current
◄ The current of the connected motor is too high. Please check
your parameters.