GRAUPNER ULTRA DUO PLUS 60 - Cycle Menu Screen

Page 24/55
4. CYCLE MENU SCREEN
4. CYCLE MENU SCREEN
4-1. DIRECTION
- Set cycle direction.
- D:CD This mode is to first unconditionally discharge then charge to discharge
repeatedly.
4-2. CYCLE TIME
- Set the cycle repeat time number.
4-3. AF-CHG DELAY
- Set pause time before discharging after charging.
4-4. AF-DCH DELAY
- Set pause time before charging after discharging, so the battery can cool down
after discharging before the next charging starts.
- - - = - - - - - -
CYCLE
D:C>D 1T C00/D00min
CYCLE SETUP <1/1>
DIRECTION D:C>D
CYCLE TIME _0
AF-CHG DELAY _0min
AF-DCH DELAY _0min
CYCLE SETUP <1/1>
DIRECTION D:C>D
CYCLE TIME _0
AF-CHG DELAY _0min
AF-DCH DELAY _0min
CYCLE SETUP <1/1>
DIRECTION D:C>D
CYCLE TIME _0
AF-CHG DELAY _0min
AF-DCH DELAY _0min
CYCLE SETUP <1/1>
DIRECTION D:C>D
CYCLE TIME _0
AF-CHG DELAY _0min
AF-DCH DELAY _0min