47
When a charge or discharge program comes to an end,
the screen displays the message END, alternating with
the program name. At the same time the integral buzzer
sounds for a limited period.
Ready message
________________
________________
END 48:32 03363
The current input voltage and battery resistance can be
called up at any time by pressing the INC and DEC
buttons simultaneously.
Change the display with INC or DEC button to input
voltage, the battery resistance display and to the single
cell voltages and backwards.
Displaying the Input voltage can be very useful if you are
using your car’s battery as energy source for charging.
________________
________________Input Voltage
13.62V
DECINC
Input voltage and Battery resistance display
The battery resistance is messured after a few min after starting charging/discharging.
The battery resistance is one important value to determine the battery quality.
Press any button to return to the menu system.
________________
________________ Battery Res.
25m
Display the voltage of the single cells
DECINC
________________
________________1.
]]]]]]]]
]]]]]]]]
]]]] 4.153V
2.
]]]]]]]]
]]]]]]]]
]]]]
]]
]]
] 4.168V
________________
________________3.
]]]]]]
]]]]]]
]]] 4.053V
4. 0.000V
________________
________________5. 0.000V
6. 0.000V
________________
________________Input Voltage
13.62V
________________
________________ Battery Res.
25m
The current input voltage and battery resistance can be
called up at any time by pressing the INC and DEC
buttons simultaneously.
Change the display with INC or DEC button to input
voltage, the battery resistance display and to the single
cell voltages and backwards.
Displaying the single cell voltages is useful to check the
single cell voltages 1-6 for output 1 and 1-3 for output 2
and 3.
________________
________________OUT[2] 0.000V
0.000V 0.000V
________________
________________OUT[3] 0.000V
0.000V 0.000V
To Next Page
Loading...
