Grazioli HW10V User Manual

{(6razioli
®
antenne.com
HW10V
Antenna verticale 1/2 À tarabile da 26 a 30 MHz
Vertical 1/2 À antenna tunable from 26 to 30 MHz
Manuale di assemblaggio e installazione
Assembly and installati on manual
WARNING
INSTALLATION OF THIS PRODUCT NEAR POWER
LINES IS DANGEROUS. FOR YOUR SAFETY AND
BEFORE YOU BEGIN INSTALLATION, READ THE
SAFETY INFORMATION SECTION IN THIS MANUAL
Grzal è u n m rch  o reg st r t o d  GPF S  r  l
Grzal s  regste red t rdem rk of GPF S.r.l.
Model HW1 0V P/N 8010020
Serial N
°
>01002A _ <
ATTENZONE quest pgn rport l numero serle NON GETTARE
ATTENTON ths pge show the serl number DO NOT DISCARD
GPF Srl V dell'Artgnto, 9 ZAI 46040 Cvrn (MN) ITALY
www .grzai nten ne.com m l: nfo@grzolntenne.com
Copyrght© 2021 GPF Sr - AII Rights Reserved - Techncal Data are subjected to change - Printed in TALY
M004 Rev.1
1/10

Grazioli HW10V Specifications

General

Brand	Grazioli
Model	HW10V
Category	Antenna
Language	English

Summary

Description and Technical Data

Product Description

Overview of the HW10V vertical antenna, its construction, materials, and frequency range.

Electrical Specifications

Details on antenna type, frequency range, impedance, radiation, polarization, gain, bandwidth, and power rating.

Mechanical Specifications

Information on construction materials, wind surface area, wind load, height, radiator length, and weight.

Mounting Parts List

Parts Contained in the Box

List of all aluminum tubes, fiberglass tubes, and hardware components included with the antenna.

Hardware Bag Contents

Detailed lists of hardware components found in various numbered hardware bags (SV006, SV003, SV007, SV004).

Safety Information

Electrical Danger Warning

Crucial warnings about the antenna being an electrical conductor and the risk of death from power line contact.

Handling Precautions

Safety advice regarding sharp aluminum edges and fiberglass material, recommending protective gear.

Positioning and Location Guidelines

Recommendations for optimal antenna placement, away from surrounding objects like buildings and power lines.

Assembly Procedure

Required Tools

List of essential tools needed for the assembly process, including tape measures and various wrenches.

Step 1: Tube Insertion

Instructions for inserting aluminum tubes into the fiberglass tube and securing them with specific hardware.

Step 2: Coil Assembly

Guidance on attaching the MA00200 sleeve to the ML00200 coil and positioning the coil.

Step 3: Coil Securing

Details on firmly fixing the coil using VTM602 screws and the supplied E3 wrench.

Step 4: Connector Plate Assembly

Instructions for assembling the AN00100 ring, PS00200 plate, and CNUHF01 connector.

Step 5: Bracket Attachment

Steps to attach the assembled ring/plate to the lower antenna tube using screws and washers.

Step 6: L-Bracket Installation

Procedure for installing the EC00200 aluminum L-bracket and securing it with specified hardware.

Step 7: Capacitor Assembly

Instructions for mounting the CAPAS01 assembly, ST00200 bracket, and fitting the aluminum tube.

Step 8: Fixing Bracket Assembly

Details on assembling the fixing brackets by inserting pins, Allen screws, and self-locking nuts.

Step 9: Pole Mounting

Instructions for attaching the assembled brackets to the lower antenna tube and fixing them to the mounting pole.

Tuning Table and Fine Tuning

Fine Tuning Procedure

Guide on adjusting telescoping sections and aluminum tubes for desired frequency resonance using measurements.

Manufacturer's Declarations

Declaration of Origin

Statement confirming that all Grazioli products are manufactured entirely in Italy.

Compliance Declaration (EU RoHS3)

Confirmation of compliance with EU directives regarding hazardous substances in materials.

CE Approval and Marking

Explanation that the antenna, being a passive accessory, does not require CE marking.

3 Years Warranty