5. Disassemble Electric Box Sub-assy
unscrew the screw of electric box, pull out the
lead out insert of compressor, four-way valve and
motor, then take down the electric box.
4. Disassembel Right side plate
Unscrew the 9 screws of the right side plate, then
take down the right side plate.
Right side plate
Screw
Electric box cover
Operating Procedures / Photos
Unsolder the pipeline connecting with valves ( to
prevent soldering gun from burning out the
chassis).Unscrew 2 bolts fixing gas valve ,and
then unsolder the weld spot between pipeline and
gas valve to remove gas valve. Unscrew the 2
bolts fixing liquid valve, and then unsolder the
weld spots between pipeline and liquid valve to
remove liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth to avoid damage for high temperature.)
6. Disassemble Gas and Liquid Valves
Bolts
Liquid Valve
Gas Valve
To Next Page
Loading...
