Fengyun Series
Operating Procedures / Photos
Disassemble Cabinet
Use screwdriver to screw off the screws around
the cabinet to remove the cabinet. （refer to
Figure 7-17）
Screw
Cabinet
Figure 7-18
Figure 7-17
Disassemble Electric Box
Use screwdriver to screw off the two screws
fixing the electric box, and pull the electric box to
remove it.
（refer to Figure 8-18）
Electric Box
Screw
Soft startup plate
Right Side Plate
Screw
Disassemble Right Side Plate
Use screwdriver to screw off the 7 screws at
the right side plate, condenser side plate and
valve suport, and then pull the right side plate
sub-assy upward to remove it.
（refer to Figure 7-19）
Figure 7-19
To Next Page
Loading...
