GREE Duct type split Air conditioner Inverter Series
40
3.4.4 Control units
(1) Click icon of “Setting” on menu bar and select parameter settings, which include “Gateway
Settings”, “IDU Settings”, “System Settings”, “Project Number Conflict (In case there is project
number conflict in indoor units, other functions will be shielded. Then this parameter needs to
be set in order to eliminate the conflict)” and “System Historical Info”. Click the corresponding
set and adjust the parameters.
(2) Take indoor unit as an example. Click “IDU Settings” and a dialog box will pop up.
To Next Page
Loading...
