G-Cloud
11
4.2 Configuring/Reset WiFi (2 Methods):
1） Method 1 (Temperature Controller): Under the power-o
n state, press “function”button on the temperature con
troller to switch to the WiFi function. The WiFi icon fla
shes, and then it enters into the WiFi function setting
status. The original temperature display area“888” wi
ll display the current WiFi status by default. Use the "
up" and "down" buttons to select the setting content.
Select “ ”and then press the "swing / OK" butto
n to save the setting, that is, G-Cloud has been reset
successfully.
2） Method 2 (G-cloud): Press and hold the button of G-Cloud for 8s to reset it.
Note: It needs to perform the configuration again when replacing the router, th
e router name and router password.
To Next Page
Loading...
