Gree G17-5MCVWAC1 - Page 8

8
To install the Upper Guide Rail, peel off the
back side of the Top Mounting Rail Seal
Strip and align it on the bottom edge of the
upper guide rail. Press the Top Mounting Rail
Seal Strip onto the Guide Rail to fully seal.
Use 4 Type A Screws to attach the Upper Guide Rail onto
the outer case of the air conditioner unit.
*Upper guide rail may be attached on some units
Upper Guide Rail
Top
Mounting
Rail Seal
Strip
1 2
INSTALLATION INSTRUCTIONS
NOTICE:
This picture is for reference only. Please refer to the actual product for the appearance.
Remove
backing
from seal
strip
Note: For
safety,
all four screws
must be
SECURELY
fastened.
Upper Guide Rail*
Hold Frame with one hand while extending Flexible
Screen with other hand. Slide edge of Flexible Screen
into track on side of unit.
Slide the upper and lower ends of the Flexible Screen
Frame into the Upper and Lower Guide Rails.
Left Right
Flexible Screen
Upper Guide Rail
Frame
Frame
3 4
Lower Guide Rail