86
Installation and Maintenance
Service Manual
Procedure
Steps
Screws
Screws
Front panel
Screws 2
Right
side plate
Right side
plate
Screws 2
Rear grill
Screws 1
Screws 2
Screws 2
Remove the screws connecting the front
panel with the chassis and the motor support,
and then remove the front panel.
Remove the screws 2 connecting the right
side plate with the chassis, the valve support
and the electric box, and then remove the
right side plate .
Remove the screws 1 connecing the left side
plate and right side plate and then remove
rear grill.
4. Remove front panel
5. Remove rear grill and right side plate
To Next Page
Loading...
