6
AIR CONDITIONER SAFETY
Y ou c an be killed or s erious ly injured if you don't
immediately follow ins tructions .
Y ou c an be killed or s erious ly injured if you don't
follow ins truc tions .
All safety mess ages will tell you what the potential hazard is, tell you how to reduce the chance of injury,
and tell you
what can
happen if the instructions are not followed.
We have provided many important safety messages in this manual and on your appliance. Always read and
obey all saf
ety messages .
This is the safety alert symbol.
This s ymbol alerts you to potential hazards that can kill or hurt you and others.
All safety mess ages will follow the s afety alert symbol and either the word “ DANGER ” or
“WAR NING .” T hes e words mean:
To reduce the risk of fire, electrical shock or injury when us ing your air conditioner, follow these bas ic
precautions:
SAVE THESE INSTRUCTIONS
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Electrical Requirements
The electrical ratings for your air conditioner are listed on the
model and serial number label. The model and serial number
label is located behind the front panel above the coil area.
Specific electrical requirements are listed in the chart below.
Follow the requirements for the type of plug on the power supply
cord.
Power supply cord Wiring requirements
115 volt (103.5 min. -
126.5max.)
0-12 amps
15-amp time-delay fuse or
circuitbreaker
Use on single outlet circuit
only.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Do not use an extension cord.
Do not use an adapter.
Do not remove ground prong.
Your safety and the safety of other are very important.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
LCDI
POWER
RESET
TEST
RESET
TEST
To Next Page
Loading...
