22
© Copyright, GREE Canada, 2017
Step 1: Install top mounting rail
1) Tear off the paster at back side of top mounting rail seal strip, and then align it at
the bottom edge of top mounting rail to stick the top mounting rail seal strip at the
bottom of top mounting rail. (The top mounting rail seal strip has been stick on the top
mounting rail for some models. Therefore, this step can be omitted.)
Step 2: Install accordion panel
1) Stick one accordion panel seal respectively on the left side and right side of accordion
panel installation frame, as shown in the gure.
Installation procedure
Top mounting rail
Top mounting rail seal strip
2) Use 4 type A screws to x the top mounting rail at the outer case of air condition.
(The top mounting rail has been xed on the conditioner for some models. Therefore,
this step can be omitted.)
To Next Page
Loading...
