Gree GMV-36WL/A-T(U) - Page 116

DC Inverter Side Discharge VRF Ⅱ for North America
114
4. Remove the
compressor from
chassis
Take out the
compressor and
replace it
Note: When
replacing the
compressor, do not
damage nearby
pipelines and other
parts
5. Fix the new
compressor at the
chassis
After replacing the
compresor, fix the
nuts at the bottom of
compressor
6. Connect
suction pipe and
discharge pipe of
copressor and
pipeline of system
again
Weld the connection
pipe of compressor,
connect the pipeline
and compressor
Note: During welding
process, do not let
flame burn out other
parts