Gree GMV-36WL/A-T(U) - Page 117

DC Inverter Side Discharge VRF Ⅱ for North America
115
7. Connect the
power cord of
compressor well
Loose screws fixing
the power cord with
screwdriver
conenct the power
cord well again
Note: When
connecting the
power cord, make
marks for different
color power cords
and corresponding
wiring terminals.
8. Check and
open the upper
cover plate
Check whether the
pipeline is connected
well
Check whetehr all
parts and connection
wires are connected
well
If there’s no problem
after checking, install
front and rear cover
plates.