DC Inverter Side Discharge VRF Ⅱ for North America
46
Click “Start” to enable the debugging function. Then debugging will be started up
automatically. indicates that debugging is in progress while indicates
debugging is completed.
If “OK” button is displayed, it means user needs to judge whether to continue
debugging or not. Click icon and relevant information will be shown for your
reference. Click “Close” to close the pop-up (For No.3 Confirm ODU Basic Module
NO. and No.4 Confirm IDU NO., the current number of units under debugging will be
displayed. See the following marked with circle. For No.8 Compr. Preheat
To Next Page
Loading...
