DC Inverter Side Discharge VRF Ⅱ for North America
56
and G2 interfaces of the wiring board.
Gree monitoring software should be connected with RS485 interface when converter
is used. Connect outdoor or indoor units or the mainboard of wired controller
according to actual needs.
HBS, CAN and RS485 of the converter can be switched by buttons. Press the button
“SET” on the converter to realize the conversion among HBS, CAN and RS485
interfaces. You can check the setting through the function LEDs.
Notice: If it’s the first time your PC uses Gree USB data converter, in order to prevent
Gree USB data converter from being mistaken by your computer as other devices
and make sure your mouse can work well, it is necessary to turn off the Serail
Enumerator of computer after Gree USB data converter is connected. Below are the
steps:
Step 1: Right-click ”My Computer” on the desktop and click ”Manage”.
To Next Page
Loading...
