Multi Variable Air Conditioners Ducted Type Indoor Unit
21
9 Troubleshooting
The air conditioner is not expected to be serviced by users. Incorrect repair may cause electric shock
or fire, so please contact an authorized service center for professional service. The following checks prior
to contact may save your time and money.
Phenomenon Troubleshooting
The unit can’t start.
① Power supply is not connected.
② Circuit breaker tripping caused by leakage of electricity.
③ Input voltage is too low.
④
The unit stops after running for a
① The inlet or outlet of ODU or IDU are blocked by obstacle.
Poor cooling effect.
① The filter is dirty.
② Too heavy heat load of room (e.g. too many people).
③ Door or windows is open.
④ Inlet and outlet of IDU are blocked.
⑤ Setting temperature is too high.
⑥ Refrigerant is insufficient (e.g. refrigerant leakage).
Poor heating effect.
① The filter is dirty.
② Door or window is open.
③ Setting temperature is too low.
④ Refrigerant is insufficient (e.g. refrigerant leakage).
Indoor fan doesn’t start up during
heating.
① At starting, the IDU fan could not operate till the heat exchange become
hot, for preventing delivering the cool air.
② At defrosting, the IDU fan stopped due to system switch to cooling mode.
For preventing delivering the cool air, and resume operating after
defrosting.
If air conditioner still fails to work normally after checking and handling as described above, please
stop using it immediately and contact local service center for assistance.
To Next Page
Loading...
