Gree GMV5 Series - Page 415

GMV5 D.C INVERTER MULTI VRF SERVICE MANUAL
412
(2) If there is not hardware fault or the fault is addressed, restart BAS Service. There are two
methods to restart BAS Service.
Method a
①
Right click the BAS Manager icon in the status bar at the lower right corner on the desktop and
choose ―Open‖.
②
In the displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.
Method b
Choose ―Start‖ -> ―All Programs‖ -> ―Gree CAC Remote Monitoring System‖-> ―Service Manager‖.
In the displayed ―BAS Manager‖ window, click ―Start‖ to enable BAS Manager.