24
Maintenance
Service Manual
Installation procedures
Accessory list
Note:
check if the accessories are available before installation
Preparation before Installation
Install wire hook
Install drainage pipe
Install window frame
Install heat discharge pipe and joint
pack up heat discharge pipe
Note: this flow is only for reference; please find the more detailed installation steps in this section.
Preparation before installation
Start installation
Prepare tools
Read the requirements
for electric connection
Check after installation and test operation
Finish installation
joint A joint B joint C
drainage pip
user's manual
battery (2)
(AAA 1.5V)
screw(3) pipe clip rubber plug pipe hoop (2)
wire hook (2)
Drain connector (1)
heat discharge pipe
remote control
To Next Page
Loading...
