GREE AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
29
3.2 Basic requirement for the installation position
If the product is installed at below places, it may cause malfunction for the air source water heater. If
it’s unavoidable, please contact local Gree appointed maintenance center to purchase special models.
(1) There are thermal sources, steam, flammable gas and explosive or volatile substances.
(2) There are high-frequency equipments, such as welding machines, medical facilities.
(3) Coastal places.
(4) There’s oil (machine oil) in the air.
(5) There’s sulfureted gas (sulfur spring).
(6) Special places.
3.3 Selection for installation positions
(1) Suggest to install the unit indoors. But do not make the wind blowing to the living room.
(2) The noise and discharge air won’t disturb neighbours, animals or plants.
(3) Make sure the good ventilation for the water heater; air inlet and air outlet of water heater can’t be
blocked.
(4) The installation position should bear the weight and vibration for the water heater.
(5) Select the dry place. The unit can’t be exposed at direct sunshine or strong wind.
(6) Make sure the heat exchanger comply with the requirement of the installation drawing issue; the
unit should be installed at the place where’s convenient for maintenance and inspection.
(7) Select the place where is beyond the children.
(8) Do not affect the public passage and the city appearance.
To Next Page
Loading...
