Gree GRS-1.5/TD200ANbA-K - Product; Models List

GREE AIR SOURCE HEAT PUMP WATER HEATER SERVICE MANUAL
2
PRODUCT
1 MODELS LIST
Product type
Model
Product
Code
Heating capacity
(W)
Outline diagram
Integral type
GRS-2.4/D270ANbA-K
ER02100050
2400+1500
(electric heating)
GRS-1.5/D150ANbA-K
GRS-1.5/D200ANbA-K
ER02100070
ER02100080
1500+1500
(electric heating)
GRS-1.5/TD150ANbA-K
GRS-1.5/TD200ANbA-K
ER02100100
ER02100090
1500+1500
(electric heating)
Notes:
① The above table lists specifications of the air source water heater series product for static heat up. The
product standard is EN16147-2011, (EU) No 814/2013, EN 12102-2008.
② Conditions for testing heating capacity of the unit: outdoor ambient temperature: 20°C DB/15°C WB;
Initial/ending water temperature in the water tank: 15°C /55°C .
③ For units with a water tank equipped with an electrical heater, that is, the model of which includes ― D ‖,
both the heat pump and electrical heater are started for heat up under low ambient temperature or rapid
mode.
④ If the product specification changes with product improvement, refer to the parameter specified on the
nameplate.