Gree GRS-CP11Pd/NhA-D - Operating Parameters; Operating Range for Temperature and Pressure

Heat Pump Pool Heater
9
①
The above maximum power or maximum current don’t include the power
or current of external engineering water pump.
②
The noise data is the average sound pressure value measured under
high temperature and mid humidity heating conditions (Dry air 80.6
℉
-Relative humidity 63% - Water inlet temperature 80
℉
) with a distance
of 1m away from the unit.
③
This parametric is the maximum refrigerant charge amount of the unit.
④
The recommended maximum pool volume is based on the ideal
heating condition that the pool is well shaded; the filtration system runs
for 15h per day, water temperature is maintained at 80
℉
,and ambient
temperature ≥82.4
℉
.
2.2.2 Operating Range
Use the swimming pool heat pump unit within the following ranges of
temperature and water pressure to ensure safe and efficient operation.
— Heating Mode Cooling Mode
Outside temperature
5
℉
~ 113
℉
（
-15
℃
~ 45
℃
）
60.8
℉
~ 113
℉
（
16
℃
~ 45
℃
）
Water temperature
50
℉
~ 100.4
℉
（
10
℃
~ 38
℃
）
50
℉
~ 104
℉
（
10
℃
~ 40
℃
）
Setting range from the set point
59
℉
~ 104
℉
（
15
℃
~ 40
℃
）
50
℉
~ 104
℉
（
10
℃
~ 40
℃
）
Water pressure 0.1 ~ 0.5MPa 0.1 ~ 0.5MPa