Installation
80
⑦ A platform should be set up when working high above the ground.
1.1 Installation Positions of the outdoor unit
(1).
Avoid direct sunshine.
(2). Outdoor unit must be installed on a firm and solid support.
(3). Ensure the hanger rod, ceiling and building structure have sufficient strength to support the
weight of air conditioner unit.
(4). Avoid placing the outdoor unit under window or between two constructions, hence to prevent
normal operating noise from entering the room.
(5). Air flow at inlet and outlet shall not be blocked.
(6). Install at a well-ventilated place, so that the machine can absorb and discharge sufficient air.
(7). Do not install at a place where inflammable or explosive goods exist or a place subject to severe
dust, salty fog and polluted air.
1.2 Installation Positions of the indoor unit
(1) Avoid direct sunshine.
(2) Ensure the hanger rod, ceiling and building structure have sufficient strength to support the
weight of air conditioner unit.
(3) Drainage pipe is easy to connect out.
(4) Indoor and outdoor connection pipes are easy to go outdoors.
(5) Do not install at a place where inflammable or explosive goods exist or inflammable or
explosive gas might leak.
(6) Do not install at a place subject to corrosive gas, severe dust, salty fog, smoke or heavy
moisture.
1.3 Matters Need Attention
(1) The installation of unit must be in accordance with national and local safety codes.
(2) Installation quality will directly affect the normal use of the air conditioner unit. The user is
prohibited from installation on their own. Please contact your dealer after buying this machine.
Professional installation workers will provide installation and test services according to installation
manual.
(3) Do not connect to power until all installation work is completed.
2 Filed Supplied Pipes and Valves
To Next Page
Loading...
