Gree GUHD18ND3FO - Page 144

U-Match Series DC Inverter Service Manual
141
2. Disassembly of
bearing fixing plates
Unscrew the 3 screws and 2 nuts of support to
remove the mounting support
3. Disassembly of motor
Loosen the 2 screws of the motor attaching
clamp, remove the motor attaching clamp and
motor attaching clamp subassembly to remove
the motor.
Disassembly of right and left fixing plates
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly.
Step
Illustration
Handling Instruction
Disassembly of right and
left fixing plates
Disassemble the bolts on right and left fixing
plates with tools. (As is shown by the arrow in the
graph.)