91
Installation and Maintenance
Service Manual
11. Removal Procedure
Step Procedure
4. Remove Cabinet assy and front side plate
Remove connection screws connecting the cabinet
Assy and front side plate with the chassis and the
motor support, and then remove them.
5. Remove right side plate assy
Rescrew the ground screws, remove the ground wires,
loosen the screws fixing terminal board, remove the
terminal board, rescrew the screws fixing the right
plate, and remove the right side plate assy.
6. Remove electric box assy
Remove the terminals, lift up and rotate the electrical
box assy to the right so that the snaps on the clapboard
are removed and the electrical box assy are removed.
Front side plate
Cabinet assy
Right side plate assy
Electric box assy
To Next Page
Loading...
