70
Installation and Maintenance
Service Manual
Procedure
Step
8. Remove the front door plank assy
9. Remove the water tray 2
10. Remove the connection plate (air duct)
Unscrew the 8 screws which are for xing the
front door plank, and then lift the front door
plank assy to remove them out.
Screws
Unscrew the 4 screws which are for xing the
water tray 2, and then remove the water tray 2.
Unscrew the 7 screws which are for xing the
connection plate (air duct) 1, and them lift the
connection plate (air duct) to remove them
out.
Screws
Screws
Screws
Connection
plate (air duct)
Screws
Water tray 2
Front door plank
sub-assy
To Next Page
Loading...
