14
Fan Auto
Introduction for buttons on remote controller
will change in the sequence as below:
Under fixed-angle swing mode, press this button and the left and right swing status
9
Press this button and the mode will change in the sequence as below:
Note:
● Heating mode is invalid for cooling only unit.
● After selecting auto mode, remote controller won't display set temperature. Air
conditioner will select proper operation method according to indoor temperature
to comfortable environment.
Mode button
AUTO COOL FANDRY HEAT
12
Press this button can turn on (display the character of "Quiet") or turn off (not display
the character of "Quiet") quiet function.
Note:
● Quiet function is defaulted to be turned off after energization.
Quiet button
10
When pressing this button under cooling or heating mode, air conditioner will enter
into quick cooling or quick heating mode. The character of " Turbo" is displayed on
remote controller. Press this button again to exit turbo function and the character
of " Turbo" will be disappeared on remote controller.
Turbo button
●
Note:
● The unit can only operate at low speed ( ) under dry mode.
Fan button
11
Press this button can select the fan speed in the sequence as below:
OFF
● Quiet function is only applied for cooling mode.
To Next Page
Loading...
