Gree GWC09KF-K3DNA5A - Page 85

82
2
DC fan motor
M4×16
1
Fan motor
Fan motor fixing frane
Electrical box
4.Remove the electrical box.
5.Remove the partition plate.
1
Loosen the 2 screws.
2
The partition plate has
a hook on the lower
side. Lift and pull the
partition plate to remove.
Partition plate
The partition plate is fixed to
the bottom frame with a hook.
Removal Procedure
Remove the 4 tapping screws
fixing the motor. Pull out the
lead-out wire and remove the
motor. Remove the 2 tapping
screws fixing the motor
support. Lift motor support to
remove it.
Remove the 2 screws fixing
the cover of electric box. Lift to
remove the cover. Loosen
the wire and disconnect the
terminal. Lift to remove the
electric box subassembly.