Gree GWC24ACE-K6DNA1A/I - Connect Indoor Unit Wiring

1. There should be no obstruction near air inlet .
2. Select a location where the condensation water can be dispersed easily and
won't affect other people.
3. Select a location which is convenient to connect the outdoor unit and near the
power socket.
4. Select a location which is out of reach for children.
5. The location should be able to withstand the weight of indoor unit and won't
increase noise and vibration.
6. The appliance must be installed 2.5m aERYHÀRRr.
7. Don't install the indoor unit right above the electric appliance.
3OHDVHWU\\RXUEHVWWRNHHSZD\IURPÀXRUHVFHQWODPS
Basic requirement
Indoor unit
Installing the unit in the following places maycause malfunction. If it is unavoidable,
please consult the local dealer:
1. The place with strong heat sources,
YDSRUVÀDPPDEOHRUH[SORVLYHJDV , or
volatile objects spread in the air.
2. The place with high-frequency devices (such as welding machine, medical
equipment).
3. The place near coast area.
4.
The place with oil or fumes in the air.
5. The place with sulfureted gas.
6. Other places with special circumstances.
7. The appliance shall nost be installed in the laundry.
8. It’s not allowed to be installed on
the unstable or motive base structure
(such as truck) or in the corrosive environment (such as chemical factory).
2
Selection of installation location
Tools for installation
1 Level meter 2 Screw driver 3 Impact drill
4 Drill head 3LSHH[SDQGHr 6 Torque wrench
7 Open-end wrench 8 Pipe cutter 9 Leakage detector
10 Vacuum pump 11 Pressure meter 12 Universal meter
,QQHUKH[DJRQVSDQQHU 14 Measuring tape
Note:
Ɣ3OHDVHFRQWDFWWKHORFDODJHQWIRULQVWDOODWLRQ