Gree GWC24ACE-K6DNA1A/I - Hang the Indoor Unit; Post-Installation Checks and Testing; Check After Installation

position.In order to drain smoothly, slant the piping hole on the wall slightly
downward to the outdoor side with the gradient of 5-10°.
1
Installation of indoor unit
Step one: choosing installation location
Step two: install wall-mounting frame
rm it with the client.
plastic expansion particles in the holes.
.
1. Choose the position of piping hole according to the direction of outlet pipe. The
position of piping hole should be a little lower than the wall-mounted frame,
shown as below.
Step three: open piping hole
ACC:
Left
Wall
ĭPP
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
ĭPP
Rear piping hole
Left
Wall
ĭPP
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
ĭPP
Rear piping hole
ACD:
Left
Wall
ĭPP
Right
Mark in the middle of it
Level meter
Rear piping hole
Wall
Space
to the
wall
above
150mm
Space
to the
wall
above
150mm
ĭPP
Rear piping hole
ACE: