Gree GWH09AKC-K6DNA1A/I - Indoor Unit Installation; Power Wire Connection

Installation of indoor unit
2.
Make the power connection wire go
of indoor unit and then pull it out from
the front side.
hole
3.
with wire clip.
green
Outdoor unit connection
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
be more than 3mm.
3
power connection
wire
PCB
black brown blue
Note:
All wires of indoor unit and outdoor unit sh ould be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.