Gree GWH24ACD-K3NNA1A/I - Page 58

55
Installation and Maintenance
Service Manual
Procedure
Step
Motor.support
Remove.the.screws.
.motor.and.then.
remove.the.motor.
Remove.the.screws.
xing.motor.support.
and.then.remove.the.motor.support.
10..Remove.motor
11..Remove.motor.support
Motor
Screws
Screws
Capillary.sub-assy
Spot.weld
Spot.weld
4-way.valve.assy
12..Remove.4-way.valve.assy.and.capillary.sub-assy
Unsolder.the.spot.weld.of.4-way.valve.assy,.
capillary,.compressor.and.condenser,.and.
then.remove.the.4-way.valve.assy.and.
capillary.sub-assy.
Note:
When.unsoldering.the.spot.weld,.wrap.
the.4-way.valve.with.wet.cloth.completely.
to.avoid.damaging.the.valve.due.to.high.
temperature.