Removal Procedure
85
10. Removal Procedure
Warning Be sure to wait for a minimum of 10 minutes after
turning off all power supplies before disassembly.
(1) Models:GWHD(14)NK3BO,GWHD(18)NK3DO
Steps Procedure
1. Before disassembly
Complete axonometric drawing.
2. Remove valve cover
Remove the connection screw fixing the valve
cover and then remove the valve cover.
3. Remove handle
Remove the connection screw fixing the handle
and the right side plate, and then remove the
handle.
valve cover
handle
To Next Page
Loading...
