Artful
Operating Procedures / Photos
Disassemble Gas and Liquid Valves
Unsolder the pipeline connecting with valves ( to prevent
soldering gun from burning out the chassis).Unscrew
2 bolts fixing gas valve ,and then unsolder the weld
spot between pipeline and gas valve to remove gas
valve. Unscrew the 2 bolts fixing liquid valve ,and
then unsolder the soldering spot between pipeline
and liquid valve to remove liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth avoid damage for high temperature.)
Liquid Valve
Bolts
Gas Valve
Disassemble Axial Flow Fan
Unscrew the nut fixing the fan with a spanner to
take out the fan .
Nut
Axial Flow
Fan
Disassemble Outdoor Motor
Unscrew the screws fixing the motor support ,and
then lift it upwards to remove it. Unscrew the screws
fixing the motor and pull out the connection line between
it and electric box to remove it.
Motor
Fixing screw
Motor Support
Fixing screw
Downloaded from AC-Manual.com Manuals
To Next Page
Loading...
