ON/OFF
HIGH
TIME
AM
MODE
FAN
SEND
TIMER
DRY
Hr
SLEEP
Min
１８ Ｃ
０
5.Press "SEND" , send the operation
to the unit.
1.After inserting the batteries, press
"ON/OFF" to start the unit.
2.Press "DRY" , to set "DRY" mode,
when repress dry, it will run in original
operation.
3.Press "TEMP", to set desired temp.
4.Press "FAN" , to set fan speed.
When the unit is in DRY mode, the compressor
is protecting, the fan motor runs at low fan speed.
DRY
－13 －
DRY MODE OPERATION
To Next Page
Loading...
