Gree NRQD16G/A-S - Unit Structure and Parameters; Internal Structure of Hot Water Converter; Outline Dimension and Appearance

Hot water converter of GMV5 Home Installation and Operation Manual
3
4 Structure and Performance Parameter of Unit
4.1 Internal Structure of Hot Water Converter
Hot water converter mainly consists of electric box sub-assy, magnet valve sub-assy, electric
expansion valve sub-assy, electric controller, etc., and the internal structure is shown as below.
Fig. 4.1
4.2 Introduction to Outline Dimension and Appearance of Hot Water
Converter
Fig. 4.2
air pipe
air pipe
high-pressure
air pipe
liquid pipe
high-pressure
air pipe
liquid pipe
liquid pipe
Connect
to indoor unit
Connect
to water tank
Connect to outdoor unit
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.