A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
190
5. Mount a new electric box
sub-assembly
● Assemble the new
electric box sub-assembly
to correct position
● Use the screwdriver to
fix the electric box
sub-assembly to middle
isolation plate and rear
side plate according to
disassembly procedures.
6. Connect the power cable
of each component
● Connect the wires of
each component to correct
position according to
disassembly procedures.
For details, please refer to
the wiring diagram.
7. Assemble the electric
box cove
● Assemble the electric
box cover to correct
position and use
screwdriver to tighten the
fixing screws.