A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
214
Disassembly of panel parts
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly. Do not scratch the outer parts.
Step Illustration Handling Instruction
Disassembly of
panel parts
●Unscrew the 3
sides’ screws on
the cover to
remove the cover.
Disassembly of sub-assy of electric box
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the components inside the box in case of water and hit.
Step Illustration Handling Instruction
Disassembly
of electric
box cover
●Disassemble 3
screws as shown by
the arrow in the graph
on left and remove the
electric box cover.
Disassembly of air deflecting plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the joints of the air deflecting plate.
Step Illustration Handling Instruction
Disassembly
of sub-assy of
air deflecting
plate
●Remove the air
deflecting plates
from the air
deflecting plate
support assembly,
and then remove
both ends from the
air sweeping motor.
joint (As is shown in
the graph, arrow
represents the
support assembly
and circle the air
sweeping motor
joint.)
Disassemble of water-containing plate modules
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during
disassembly.
Step Illustration Handling Instruction
To Next Page
Loading...
