A/A DC INVERTER U-MATCH AIR CONDITIONERS MAINTENANCE
215
Disassemble
of
water-containi
ng plate
modules
●remove the
water-containing plate
modules.
Disassembly of evaporator components
Remark: Make sure that the power supply is cut off and protect the copper tube and aluminum fin. If the time for
disassembly shall be long, seal the copper tube .
Step Illustration Handling Instruction
Disassembly
of evaporator
components
●Unscrew the 6 screws
of evaporator, 3
screws of water
groove press board
and the 2 screws of
water board to
remove the
evaporator.
Disassembly of fixing plate sub-assy for air sweeping fans
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly.
Step Illustration Handling Instruction
Disassembly
of fixing plate
sub-assy for
air sweeping
fans
●Remove the display
board, mounting
support and
mounting plate of
swing motor in turn.
Disassembly of fan and motor components
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during
disassembly, especially the fastening screws for fans.
Step Illustration Handling Instruction
1.
Disassembly
of front and
back scroll
cases
●Press the buckle at
the joints of front and
back scroll cases with
hands and pull
upward to remove the
front scroll case. Then
remove the screws on
the back scroll case.
Lift the buckle of back
scroll case with hands
and remove it.(As is
shown in the graph,
circle represents 2
screws on left and
right.)
To Next Page
Loading...
